The Flooring Expert

Sprial Welding Finned Tube(Helical Finned Tubes)

Short Description:

high frequency welded spiral finned tubes are generally used for petrochemical industry and mostly installed on the convection sections of fired heaters, waste heat boilers, economizers, air preheaters, and heat exchangers involving the transfer of heat from a hot fluid to a colder fluid through a tube wall.


Product Detail

Product Tags

Product Introduction

Helical Finned Tubes provide the designer with high thermal efficiency and compact design solutions for a whole range of heat exchangers where clean flue gases are encountered. Helical finned Tubes are manufactured in both Solid and Serrated win profiles.

Helical Solid Finned Tubes are produced by helically wrapping continuous fin strip tube. The fin strip is wounded spirally onto the tube and welded continuously with a High Frequency Electrical process to the tube along the spiral root. The fin strip is held under tension and confined laterally as it is formed around the tube, thereby ensuring that the strip is in forceful contact with the tube surface.  A continuous weld is applied at the point where the fin strip first begins to bend around the tube diameter, using the gas metal arc welding process.

For a given pipe or tube size, the desired heat transfer surface area per unit length of tube can be obtained by specifying the appropriate fin height and/or number of fins per inch of length.

This welded steel finned tube configuration can be used for practically any heat transfer application, and is particularly suited to high temperature, high pressure applications.   The important features of this configuration are efficient, effective bond of fin to tube under all conditions of temperature and pressure, and ability to withstand high fin-side temperatures.

A continuous helical fin is attached to the base tube by high frequency electric resistance welding in order to give an efficient and thermally reliable bond.

Product Display

Product Specification

Base Tube O.D
(mm)

Base Tube Thickness (mm)

Fin Height
(mm)

Fin Thickness(mm)

Fin Pitch(mm)

22 mm ~219 mm

2.0 mm ~16 mm

8 mm ~ 30 mm

0.8 mm ~ 4.0 mm

2.8 mm ~ 20 mm

Base Tube Material

Fin Material

Tube Length (Mtr)

Carbon Steel, Alloy Steel, Stainless Steel and Corrosion-resistance Steel

Carbon Steel, Alloy Steel, Stainless Steel and Corrosion-resistance Steel

≤ 25Mtrs


  • Previous:
  • Next:

  • Write your message here and send it to us