The Flooring Expert

Short Description:

Hardware for aluminum turn&tilt window is an ideal Aluminum window system solutions for Aluminum Windows,1. Suitable for 15/20 or 14/18 euro-slot extrusion profile.2. Available for sash width SK400-1600mm and height SG:530-2400mm.3. Adutional lock point be proposed to offer if sash height over 1700mm.4. Balance siay be proposed to offer if sasn width exceeds 1300mm.5. Various handle for your choice, Hinges with 3D adjustable.6. window scale (sash heightsh wiath) suggested to be 1.5:1

FOB Price: 12.38-12.34USD/SET

Min.Order Quantity: 1 Piece

Supply Ability: 1,500,000 Piece per Month

Send email to us Product Detail FAQ Product Tags

Details And Data Sheet1. Suitable for 15/20 or 14/18 euro-slot extrusion profile.2. Available for sash Width SK400-1600mm and height SG:530-2400mm.3. Adutional lock point be proposed to offer if sash height over 1700mm.4. Balance siay be proposed to offer if sasn width exceeds 1300mm.5. Various handle for your choice, Hinges with 3D adjustable.6. window scale (sash height/sash wiath) suggested to be 1.5:1Summary Table Of Hardware Configuration Of Hardware For Aluminum Turn&Tilt Window

 Series No.

 Parts Name

Material No.

 Remark

1

Top Hinge

LND-0110049-1

2

370 Scissor

LND-0110049-2A

SK=400~530

600 Scissor

LND-0110049-2B

SK=530~1600

3

Corner

LND-0110049-3

4

Keeper

LND-0110049-4

5

Drive Bar

LND-0110049-8

6

Anti Change Unit

LND-0110049-6

7

Tilt Part

LND-0110049-7

8

Tilt Stay

LND-0110049-8

9

Tilt Support

LND-0110049-9

10

Support Cushion

LND-0110049-10

11

Bottom Hinge

LND-0110049-11

12

Wind Stay

LND-0110049-

13

Extended Comer

LND-0110049-12

14

Locking Block

LND-0110049-13

15

Balance Stay

LND-0110049-14

16

Handle

LND-0110049-15

For top side hole size of aluminium joint plate calculation formula:

For 370 scissor (370):L1=W-342 W=sk(Sash width)For 450 scissor(450):L1=W-390 W=sk(Sash width)For 600 scissor(600):L1=W-447 W=sk(Sash width)

For handle side hole size of aluminum joint plate calculaiton formula:L2=SG (Sash height)H/2-297 H=sash height L3=H/2-172 H=sash heightThe above calculaiton is on the basis of 22mm folding size between sash and fram extrusion profile and only for your reference.

There are a variety of handles to choose from: square handles, curved handles, large round handles, small round handles

Hardware For Aluminum Turn&Tilt Window

Installation Process

Installation diagram of Hardware for aluminum turn&tilt windowHardware installation sequenceInstall according to Figure 1, Figure 2, Figure 3…One by one to install

Not afraid to contrast in on details

Good Material

A variety of materials available to meet your different needs, strong and durable with a long time.

Quality Clearance

Use testing equipment to test  products, layer by layer screening, control quality.

Support For Customization

Can be customized  to drawings and samples, we provide you with reasonable solutions.

Power Merchant

Use testing equipment to test  products,layer by layer,screening,control quality.

Are you still worrying about these problems?Are you still running to the hardware store?Worry about not being able to buy the specifications, too many to carry.Are you still bargaining for accessories?You don’t know how to choose the size, the workmanship is bad, You don’t know

Hardware for aluminum turn&tilt window

Why Do You Choose Us

Product name:Hardware for aluminum turn&tilt windowProduct specifications: handle (arc handle, new square handle, big round handle)Scissor:370 Scissor、450 Scissor、600 ScissorFriciton Stay (two connecting, European style Friction Stay)Product features: load-bearing 130kg, left and right interchangeable, quick installation, smooth transmission, no noise,improved the lack of the sash corner/.Product material: zinc alloy, nylon

Reliable Product Quality20 years experienceour prefessional is your success

The factory manufacturer supplys the product,

which can save intermediate links,and gives the maximum profit to the consumers.

Our Advantages1. The raw materials of the castings are made of four-in-one zinc alloy, and the advanced material formula (±50 ℃) does not deform or break.2. All stainless steel parts are made of 304 material, containing 7.5-8.5 nickel, which does not rust.3. The plastic parts in the fitting system are made of high-strength wear-resistant nylon PA66 material, which will never be damaged.4. The spraying part is sprayed with polyurethane material, the thickness is 45μm-100μm, and the dry adhesion is more than 10 grades, all exceeding national standards5. The production equipment for zinc and aluminum die-casting machine is 120Ton, and the automatic punching machine is 180Ton,which ensure the hardness, strength and toughness of the casting. Inward opening, inverted, inner and outer casement windows open and close 450,000 times of opening and closing cycles, no distortion of parts, normal use6. The surface treatment of the plated parts is a trivalent chromium electroplating process, the thickness of the plating layer is 45μm-100μm, and the salt spray test is 120 hours without pinholes, bulging and rust.After nearly a year of repeated research and designing a mold opening test, Yuqiang Hardware has successfully improved the aluminum alloy casement window hinges, connectors, and inner opening and inverted hinge chains from the original aluminum alloy extrusion material to carbon steel. Stamping parts ensure that the load-bearing capacity of the accessories is increased. The original aluminum alloy hinges can load 70kg, and the carbon steel hinges can load up to 180kg without deformation or fracture.It has fundamentally solved the load-bearing problem of super-standard large windows and triple-glazed windows. Now this product has been declared a national patent, leading other domestic brands.Production ProcessBuying Procedures

Previous: Aluminum alloy inner casement window series hardware system

Next: Hardware for UPVC Tilt&turn window System

Q:Why choose YuQiang over any other companies?A:We manufacture our products locally. Our customer service is exceptional and personalized for every customer. Every YuQiang product is armored and durable with a 12-month structural warranty. We use high quality materials sourced from the very best in China. Our design team works closely with customers for any custom orders.

Q:Which payment terms can we accept?A:Normally we can work on T/T or L/C terms, sometimes DP term.1). on T/T term, 30% advance payment is required and 70% balance shall be settled before shipment.2). On L/C term, a 100% irrevocable L/C

Q:What logistics way for product delivery?A:1).90% in shipment by sea, to all main continents such as South America, Middle East, Africa, Oceania and Europe, etc.2). For neighborhood countries of China, including Russia, Mongolia, Uzbekistan etc., we can ship by road or railway.3). For light parts in urgent need, we can deliver in international courier service, including DHL, TNT, UPS or FedEx.

Q:What are your warranty terms?A:We provide a 12-month warranty on all our products, except failure caused by improper installation, operation or maintenance, accident, damage, misuse or non YuQiang modification and normal wear.

Q:What is your lead time?A:We aim to provide customers with a fast lead time. We understand emergencies happen and priority production should be preferred in a faster turnaround. A stock order lead time is 3-5 working days, while custom orders within 1-2 weeks. Contact YuQiang products so we can provide an accurate lead time basing on situations.

Architectural Hardware

Awning Window Hardware

Awning Window Hardware Parts

Awning Windows Hardware Parts

Casement Window Hardware

Casement Window Hardware Parts

Casement Windows Hardware Parts

Door & Window Hardware Fittings Accessories

Door Hardware

Door Hardware Fittings Accessories

Write your message here and send it to us Products categories

• Aluminum alloy non-standard outer casement wind…
• Aluminum Alloy Outward Open Window Series Hardw…
• Recessed inner-opening inner-reversing hardware…
• Fire-resistant casement window hardware system
• Aluminum alloy inner casement window series har…
• Aluminum alloy inner and lower hanging window s…

Shandong Yuqiang Hardware Products Co., Ltd.

Contact us today for a design consultation.

Welcome inquiry