Customized Siliver Doorbell Camera Housing Made By Plastic Injection Molding

Short Description:

We only provide customized services,  based on detailed 3D drawings provide by customer. Ship us sample to build 3D drawing also available. We don’t sell spot products!

This is a doorbell camera housing, it’s material is Acrylonitrile Butadiene Styrene plastic +Polycarbonate(Abbreviation is ABS+PC). It’s mold cavity is1*2, the mold material is S136 HRC48-52, mold life 50 thousand shot, the injection cycle is 50 seconds.Its appearance is very eye-catching, because the surface treatment is brushed + vacuum plating high-glossy silver.


Product Detail

Product Tags

Material performance

ABS + PC combines the excellent characteristics of the two materials. The Synthetic material is suitable for the housing of electronic products, with good overall performance, high impact strength, chemical stability, and electrical properties.

Product features

This is a smart doorbell product. The appearance requirements must be very attractive to customers. The drawing texture is made on the mold; in the injection molding production process, there should be no oil responsibility on the mold surface. The robot is automatically produced, and the operator packs early. You must wear dust-free gloves to avoid the sweat from your hands sticking to the product. If there is oil responsibility, it will directly affect the adhesion of the electroplating.

This brushing surface was made by mold texture.

What’s the progress of mold texturing?

Basemap production→photographic platemaking→screen printing→ink blending→decal paper printing decorative pattern→ink drying→mold pre-treatment→decal transfer→drying→repairing→corrosion→inspection→cleaning and anti-rust.

Process principle and process of mold surface corrosion skin texture:

Mold etching adopts anti-corrosion transfer ink, screen printing decorative pattern on decal paper, and transfer the decorative pattern ink to the mold with filming method. After drying and trimming, chemical corrosion is performed to form bumps on the mold. Type decorative pattern.

That’s the introduction of this product, if you have similar design need to make prototyping or mold, warmly welcome to contact us at any time.

Product Description

pro (1)

OUR CERTIFICATION

pro (1)

OUR TRADE STEP

DTG Mould Trade Process

Quote

According to sample, drawing and specific requirement.

Discussion

Mold material, cavity number, price, runner, payment, etc.

S/C Signature

Approval for all the items

Advance

Pay 50% by T/T

Product Design Checking

We check the product design. If some position is not perfect, or can not be done on the mould, we will send customer the report.

Mould Design

We make mould design on the basis of confirmed product design, and send to customer for confirmation.

Mold Tooling

We start to make mold after mold design confirmed

Mold Processing

Send report to customer once each week

Mold Testing

Send trial samples and try-out report to customer for confirmation

Mold Modification

According to customer’s feedback

Balance settlement

50% by T/T after the customer approved the trial sample and mould quality.

Delivery

Delivery by sea or air. The forwarder can be designated by your side.

OUR WORKSHOP

pro (1)

OUR SERVICES

Sale Services

Pre-sale:
Our company provide good salesman for professional and promptly communication.

In-sale:
We have strong designer teams, will support customer R&D, If the customer send us samples, we can make product drawing and do the modification as per customer request and send to customer for approval. Also we will accord our experience and knowledge to provide customers our technological suggestions.

After-sale:
If our product have quality problem during our guarantee period, we will send you free for replace the broken piece; also if you have any issue in using our moulds, we provide you professional communication.

Other Services

We make the commitment of service as below:

1.Lead time: 30-50 working days
2.Design period: 1-5 working days
3.Email reply: within 24 hours
4.Quotation: within 2 working days
5.Customer complaints: reply within 12 hours
6.Phone call service: 24H/7D/365D 
7.Spare parts: 30%, 50%, 100%, according to specific requirement 
8.Free sample: according to specific requirement

We guarantee to provide the best and quick mold service for customers!

OUR PLASTIC INJECTION MOULDED SAMPLES

pro (1)

WHY CHOOSE US ?

1

Best design,competitive price

2

20 years rich experience worker

3

Professional in design & making plastic mould

4

One stop solution

5

On time delivery

6

Best after-sale service

7

Specialized in kinds of plastic injection molds.

OUR MOLD EXPERIENCE!

pro (1)
pro (1)

 

DTG–Your reliable plastic mould and prototype supplier!


  • Previous:
  • Next:

  • Write your message here and send it to us