The Flooring Expert

Aluminum alloy inner and lower hanging window series hardware system

Short Description:

Hardware for Aluminum Windows & Door, which is an ideal Aluminum alloy inner and lower hanging window series hardware system solutions for Aluminum Windows.1.Customers can choose other types of holding according to the introduction of product list window2.Available for European standard 20-slot aluminum alloy profiles3.For the window type with the width of 340~700mm, window height of 400~1500mm, the lock points can be configured according to the customer requirements


Product Detail

Product Tags

Details And Data Sheet 1

Summary Table Of Hardware Configuration Of Aluminum alloy inner and lower hanging window series hardware system

 Series No.

 Material No.

 Parts Name

 Quantity

 Remark

1

LHJNXX-0130087

Main drive rod

1

Optional

2

LHJNXX-0260021A

Side drive rod

2

3

LHJNXX-0130086

Lock block

2

4

LHJNXX-0110121D

Two-hole button

1

5

LHJNXX-0110121C

Booster pad

1

6

LHJNXX-0110032

Hold hands

1

Optional

7

LHJNXX-0260098

Sliding support

2

There are a variety of handles to choose from: Square handle, curved handle, big round handle, small round handle

 src=Precautions:1.Customers can choose other types of holding according to the introduction of product list window2.Available for European standard 20-slot aluminum alloy profiles3.For the window type with the width of 340~700mm, window height of 400~1500mm, the lock points can be configured according to the customer requirements

Our Advantages1. The raw materials of the castings are made of four-in-one zinc alloy, and the advanced material formula (±50 ℃) does not deform or break.2. All stainless steel parts are made of 304 material, containing 7.5-8.5 nickel, which does not rust.3. The plastic parts in the fitting system are made of high-strength wear-resistant nylon PA66 material, which will never be damaged.4. The spraying part is sprayed with polyurethane material, the thickness is 45μm-100μm, and the dry adhesion is more than 10 grades, all exceeding national standards5. The production equipment for zinc and aluminum die-casting machine is 120Ton, and the automatic punching machine is 180Ton,which ensure the hardness, strength and toughness of the casting. Inward opening, inverted, inner and outer casement windows open and close 450,000 times of opening and closing cycles, no distortion of parts, normal use6. The surface treatment of the plated parts is a trivalent chromium electroplating process, the thickness of the plating layer is 45μm-100μm, and the salt spray test is 120 hours without pinholes, bulging and rust.After nearly a year of repeated research and designing a mold opening test, Yuqiang Hardware has successfully improved the aluminum alloy casement window hinges, connectors, and inner opening and inverted hinge chains from the original aluminum alloy extrusion material to carbon steel. Stamping parts ensure that the load-bearing capacity of the accessories is increased. The original aluminum alloy hinges can load 70kg, and the carbon steel hinges can load up to 180kg without deformation or fracture.It has fundamentally solved the load-bearing problem of super-standard large windows and triple-glazed windows. Now this product has been declared a national patent, leading other domestic brands.Production Process1Buying Proceduresbuying procedures


  • Previous:
  • Next:

  • Write your message here and send it to us