Special Air-entraining Admixture for Polycarboxylate Superplasticizer
Composition: a mixture of a high molecular polymer
|Active content||about 33%|
|Appearance at 20 Celsius||colorless transparent or pale yellow liquid|
|Density at 20 Celsius||about 1.05 g/cm3|
|pH of 1% solution||about 7-9|
|Solubility at 20 Celsius||Can be dissolved in water|
|Sodium content||≤ 3%|
|Solubility||Can be dissolved in non-ionic and anionic surfactants|
|Biodegradability||PA-AE is readily biodegradable|
1. PC-AE can be used as air-entraining agent for concrete, mortar and the other products, especially for wet concrete environment of hard water and an alkaline environment (high calcium ions and high PH value).
2.Compared to the other air-entraining agents, PC-AE’s efficiency is higher and its lower amount could achieve the same air-entraining effect. PC-AE also has a specific application, such as the foaming agent of floor tile.
3.PC-AE can produce a large number of uniform microbubbles in concrete admixtures, whose foam particle size is below 300 microns in dry concrete. The air content is up to 5%.
PC-AE’s dosage is 0.01-0.1% of water-reducing agent’s weight.
> 30℃ storage will cause the surface gel. After stirring, the gel will be eliminated and may be used again. If the product is in <20℃ environment, there may be precipitation in effective material. You can re-heat and stir this product to be mixed unevenly. However, the heating temperature is not higher than 50 ℃.
At room temperature, PC-AE can be stable for one year without opening the storage. The prolonged storage will lead to the lower PH value.
Giant concrete admixtures are in the form of chemical admixtures, precast admixtures and construction chemical, admixtures used by ready-mix concrete plants, precast admixtures used by the concrete plant and concrete additives which reduce usage of water, improve durability and workability of concrete, and increase compression strength of concrete.
Concrete Admixtures and Concrete Additive Types as Follows:
Type A—Water-reducing admixtures & additive,
Type B—Retarding admixtures & additive,
Type C—Accelerating admixtures & additive,
Type D—Water-reducing and retarding admixtures & additive,
Type E—Water-reducing and accelerating admixtures & additive,
Type F—Water-reducing, high range admixtures & additive,
Type G—Water-reducing, high range, and retarding admixtures & additive.
Since its establishment, our factory has been developing first world class products with adhering the principle
of quality first. Our products have gained excellent reputation in the industry and valuabletrusty among new and old customers..